Cherry Cellular Y3 inventory rom/firmware to unbrick your telephone

(*2*)(*1*)

 Phrase: Use this firmware in Miracle Box for needless phone and soft brick phones. Whilst you would not have Miracle Box there is an available Miracle Box Mod online, on the other hand I will be able to not publish the link. Merely search in google. I will be able to not be liable should you occur to get virus from the program.

All pictures underneath are merely an example. 

You are able to restore the following issue in your phone:
1. Bootloop
2. Damaged System UI
3. TP Strengthen most simple
4. Dead phone on the other hand it is detected in laptop
5. Remove Gmail Account / Password / Pattern Lock (Variety Approach)
6. Privacy Protection Password Lock up
7. Monkey Virus/Malware 

“DOWNLOAD THESE FILES”


Download ROM –>Download ROM

Driver –> (*8*)AutoInstaller
SPFlashTool – Latest Style

“Use WinRar or 7zip to extract the firmware”
“Extract the tips on your desired folder”
“Whilst you bump into error in flashtool, use different style of it.”

“I advise to use 32bit House home windows OS for compatibility of the driving force”

“You are able to moreover use 64bit style, merely disable driver signing or driver signature previous to putting in place the driving force.”


Setting up Driver with AutoInstaller


First check out the Variety Driver, which is the AutoInstaller. Merely open the arrange.exe then it’ll automatically arrange the driver. To completely check out if the driving force is accurately installed in your laptop. 

Practice the ones steps:

  1. Turn off your phone (at all times powered off is a must)
  2. Press and cling amount up or down, or you are able to simple press the two button.
  3. Insert your USB cable without freeing the VOLUME button(s).
  4. To your laptop, it is going to have to find your phone and it’ll arrange the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does not uncover your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you could be very good to move in flashing your phone ^_^


Reference Video using Driver Auto Installer (watch in HD)

Setting up Manually using VCOM Driver

When putting in place it manually your phone must be turned into off, then connect it on your laptop/laptop while pressing VOLUME UP or VOLUME DOWN. This will uncover and seek for the driving force.

(*7*)

 1. That’s the number one time that you are going to connect your phone and it’ll search for the correct driver.

(*6*)
2. Check include this location … … and click on on on browse. Seek for USB VCOM Driver and Click on on on 2K_XP_COM folder if you’re using House home windows XP or Win7 for House home windows 7 and then press OK when you find yourself achieved opting for the correct folder for the driving force.

(*5*)

 3. If the driving force is successfully installed MediaTek DA USB VCOM will appear throughout the New {Hardware} Wizard.

Video Setting up VCOM Driver (please watch in HD)



“Your Phone must be turned into off when you find yourself ready to connect and flash your phone”

Flashing

1. Free up FlashTool (flash_tool.exe)
2. In Flashtool, Click on on on Scatter-Loading, and load your scatter report. (see example underneath)
(*10*)(*4*)

Reference Video The use of FlashTool style 5.xxx (watch in HD)




 3. After you load the report, FILL CUSTPACK, MOBILE_INFO, and other report if most simple available throughout the firmware. Put out of your mind about if not available. UNCHECK PRELOADER  most simple (Not at all flash preloader), If you’ll’t proceed  in flashing without PRELOADER include PRELOADER. Proceed at your own chance, press Press Download to Flash your Phone.


(*9*)(*3*)
4. After you press Download Practice the ones steps

  • Turn off your phone (at all times powered off is a must)
  • Press and HOLD amount UP or Down or you are able to simply press it similtaneously
  • Insert your USB cable without freeing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.

5. If successfully detected merely wait until the expansion bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put once more your battery then turn on your software.

“Laborious reset your phone after flashing”

Some workarounds:

Whilst you bump into PMT_Changed error here is what you do:
In Latest style of Flashtool

  1. PMT_CHANGED error occur when firmware is not appropriate in conjunction with your phone. From time to time your phone has a distinct board style. You’ll have to check out it too, if your firmware is appropriate in conjunction with your phone. 
  2. Take a look at Firmware beef up
  3. Take a look at different style of flashtool
  4. Try to set Structure All + Download
  5. Or check out Information Structure first then Download.

Whilst you bump into Privacy Protection Password:

  1. Open flash_tool.exe
  2. Load the scatter report
  3. Goto Structure Tab
  4. Click on on on Structure with the exception of bootloader
  5. Press Play/Get began Icon
  6. Then remove battery
  7. Insert the battery another time
  8. Insert the USB cable (you’ll have to pay attention a beep on your laptop, and it is going to need to proceed in formatting.)
  9. After achieved formatting proceed in Flashing.
  10. Goto Download tab (I guess that you simply loaded the scatter report already)
  11. Uncheck PRELOADER (this is very important)
  12. Press Download
  13. Then remove battery
  14. Insert Battery another time
  15. Insert the USB cable (you’ll have to pay attention a beep on your laptop, and it is going to need to proceed in flashing or downloading the firmware in your phone.)
  16. Power ON the phone after flashing.
  17. Restore your IMEI.

For Invalid IMEI (Does not artwork in MT6571 SoC):

  1. Root your phone by the use of vRoot/iRoot/Kingoroot or your hottest method in rooting you software. Your phone must be rooted first.
  2. Download MTKDroidsTool style 2.4.8 and style 2.5.3
  3. Permit your USB debugging in Developer Chance (you moreover need this in rooting your phone by the use of PC)
  4. Good enough in your PC — Open MTKDroidstool style 2.4.8 (Mtkdroidstool.exe) first. Make sure that you connected your phone already.
  5. Nevertheless in Mtkdroidstool — Click on on ROOT
  6. To your phone — A pop up dialogue will appear, merely grant or allow it.
  7. To your PC — If root shell is granted/allowed, Click on on in IMEI/NVRAM tab. If it is grayed out that’s the time while you open the MTKDroidsTool style 2.5.3.
  8. Enter your original IMEI
  9. Click on on Alternate
  10. Reboot your phone


FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first)


1. It would be best to have MTKDROIDSTOOL style 2.4.8 or style 2.5.3 (you are able to search it in google)
2.  In MTKDroidstool (I guess you liberate the instrument) — Click on on in Root. 
3. To your software — http://d-h.st/miIbAfter you press Root, you need to authorize it. A pop up message will appear. Click on on Allow/Authorize is decided through your root instrument.
4. In MTKDroidsTool — Click on on in IMEI/NVRAM, then click on on in RESTORE.
5. Then seek for the folder where you extracted the NVRAM knowledge.
6. Check if the Baseband is fixed. And if the IMEI is basically restored.
7. If Baseband continues to be Unknown and IMEI is invalid. Then you need to laborious reset first your phone.
8. After laborious reset your baseband must be fixed already. (base on my enjoy)
9. If your baseband is fixed once in a while the IMEI continues to be invalid. So you need to restore the IMEI.
10.  To restore IMEI apply Step 1-4, on the other hand you’ll have to not restore. You’ll have to fill the IMEI then click on on REPLACE. Then reboot your phone.  VOILA! I am hoping the phone is basically working 🙂


I am hoping this tutorial mean you can. Please drop a observation if one factor is not clear to you.

Posted by way of: Admin John