Ekotab Atom Two firmware/stockrom to unbrick your pill

(*2*)(*1*)

Apply: You will have to indisputably once more up your phone/tablet’s firmware faster than flashing this firmware.

All pictures beneath are merely an example. 


You’ll be able to restore the following issue on your phone:
1. Bootloop
2. Damaged System UI
3. TP Support best
4. Needless phone then again it is detected in pc
5. Remove Gmail Account / Password / Construction Lock (Variety Way)
6. Privacy Protection Password Lock up
7. Monkey Virus/Malware 


“DOWNLOAD THESE FILES”


Download ROM –>Download ROM

Password –> jay47
Driver –> (*8*)AutoInstaller
SPFlashTool – Latest Style


“Use WinRar or 7zip to extract the firmware”
“Extract the ideas for your desired folder”
“For many who encounter error in flashtool, use different type of it.”


“I like to recommend to use 32bit House home windows OS for compatibility of the driving force”

“You’ll be able to moreover use 64bit type, merely disable driver signing or driver signature faster than setting up the driving force.”



Setting up Driver with AutoInstaller


First check out the Variety Driver, which is the AutoInstaller. Merely open the arrange.exe then it is going to mechanically arrange the driver. To fully take a look at if the driving force is correctly installed on your pc. 

Apply the ones steps:

  1. Turn off your phone (always powered off is a will have to)
  2. Press and hold amount up or down, or you’ll be able to simple press the two button.
  3. Insert your USB cable without releasing the VOLUME button(s).
  4. To your pc, it will have to stumble on your phone and it is going to arrange the MTK Preloader or Mediatek USB VCOM driver.
  5. Repeat 1 to 4 if it does now not stumble on your phone.
  6. If MTK Preloader/Mediatek USB VCOM Driver is installed you may well be excellent to transport in flashing your phone ^_^


Reference Video using Driver Auto Installer (watch in HD)


Setting up Manually using VCOM Driver


When setting up it manually your phone will have to be was off, then connect it for your pc/pc while pressing VOLUME UP or VOLUME DOWN. This will stumble on and seek for the driving force.

(*7*)

 1. That’s the number one time that you are going to connect your phone and it is going to search for the correct driver.

(*6*)
2. Check out include this location … … and click on on on browse. Seek for USB VCOM Driver and Click on on on 2K_XP_COM folder in case you are using House home windows XP or Win7 for House home windows 7 and then press OK if you find yourself finished opting for the right kind folder for the driving force.

(*5*)

3. If the driving force is successfully installed MediaTek DA USB VCOM will appear throughout the New {Hardware} Wizard.


Video Setting up VCOM Driver (please watch in HD)





“Your Phone will have to be was off if you find yourself ready to attach and flash your phone”


Flashing

1. Free up FlashTool (flash_tool.exe)
2. In Flashtool, Click on on on Scatter-Loading, and load your scatter file. (see example beneath)
(*10*)(*4*)

Reference Video Using FlashTool type 5.xxx (watch in HD)




 3. After you load the file, FILL CUSTPACK, MOBILE_INFO, and other file if best available throughout the firmware. Disregard about if now not available. UNCHECK PRELOADER  best (Certainly not flash preloader), If you’ll be able to’t proceed  in flashing without PRELOADER include PRELOADER. Proceed at your own risk, press Press Download to Flash your Phone.


(*9*)(*3*)
4. After you press Download Apply the ones steps

  • Turn off your phone (always powered off is a will have to)
  • Press and HOLD amount UP or Down or you’ll be able to simply press it similtaneously
  • Insert your USB cable without releasing the VOLUME button(s).
  • Keep on repeating until Flashtool detected your phone.

5. If successfully detected merely wait until the improvement bar reaches 100%. If your phone did not mechanically turn on after flashing, remove battery and USB cable. And put once more your battery then turn on your tool.


“Hard reset your phone after flashing”


Some workarounds:

For many who encounter PMT_Changed error here is what you do:
In Latest type of Flashtool

  1. PMT_CHANGED error occur when firmware is not suitable at the side of your phone. Every now and then your phone has a definite board type. You will have to take a look at it too, if your firmware is acceptable at the side of your phone. 
  2. Check out Firmware give a boost to
  3. Check out different type of flashtool
  4. Try to set Format All + Download
  5. Or check out Guide Format first then Download.


For many who encounter Privacy Protection Password:


  1. Open flash_tool.exe
  2. Load the scatter file
  3. Goto Format Tab
  4. Click on on on Format except for bootloader
  5. Press Play/Get began Icon
  6. Then remove battery
  7. Insert the battery yet again
  8. Insert the USB cable (you will have to pay attention a beep on your pc, and it will have to proceed in formatting.)
  9. After finished formatting proceed in Flashing.
  10. Goto Download tab (I assume that you simply loaded the scatter file already)
  11. Uncheck PRELOADER (this is very important)
  12. Press Download
  13. Then remove battery
  14. Insert Battery yet again
  15. Insert the USB cable (you will have to pay attention a beep on your pc, and it will have to proceed in flashing or downloading the firmware on your phone.)
  16. Power ON the phone after flashing.
  17. Restore your IMEI.

For Invalid IMEI (Does now not art work in MT6571 SoC):


  1. Root your phone by means of vRoot/iRoot/Kingoroot or your preferred method in rooting you tool. Your phone will have to be rooted first.
  2. Download MTKDroidsTool type 2.4.8 and type 2.5.3
  3. Allow your USB debugging in Developer Selection (you moreover need this in rooting your phone by means of PC)
  4. Okay on your PC — Open MTKDroidstool type 2.4.8 (Mtkdroidstool.exe) first. Make sure that you connected your phone already.
  5. However in Mtkdroidstool — Click on on ROOT
  6. To your phone — A pop up dialogue will appear, merely grant or allow it.
  7. To your PC — If root shell is granted/allowed, Click on on in IMEI/NVRAM tab. If it is grayed out that’s the time whilst you open the MTKDroidsTool type 2.5.3.
  8. Enter your distinctive IMEI
  9. Click on on Exchange
  10. Reboot your phone



FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone will have to be rooted first)



1. Make sure to have MTKDROIDSTOOL type 2.4.8 or type 2.5.3 (you’ll be able to search it in google)
2.  In MTKDroidstool (I assume you unencumber the device) — Click on on in Root. 
3. To your tool — http://d-h.st/miIbAfter you press Root, you wish to have to authorize it. A pop up message will appear. Click on on Allow/Authorize depends upon your root device.
4. In MTKDroidsTool — Click on on in IMEI/NVRAM, then click on on in RESTORE.
5. Then seek for the folder where you extracted the NVRAM knowledge.
6. Check out if the Baseband is fixed. And if the IMEI is actually restored.
7. If Baseband continues to be Unknown and IMEI is invalid. Then you wish to have to onerous reset first your phone.
8. After onerous reset your baseband will have to be fixed already. (base on my revel in)
9. If your baseband is fixed once in a while the IMEI continues to be invalid. So you wish to have to restore the IMEI.
10.  To restore IMEI follow Step 1-4, then again you will have to now not restore. You will have to fill the IMEI then click on on REPLACE. Then reboot your phone.  VOILA! I am hoping the phone is actually working 🙂


I am hoping this educational imply you’ll be able to. Please drop a commentary if one factor is not clear to you.

Posted by the use of: Admin John