Categories
hardware

InWin 216 Review: $80 E-ATX, however No Fans

The InWin 216 delivers E-ATX strengthen with out being too large, and springs with graceful appears to be like and a touch of aptitude because of the huge InWin brand and textual content. There isn’t any RGB to be discovered right here, or any enthusiasts. This is a chassis for many who simply need a large, sensible construct field that doesn’t stand out an excessive amount of and  who will deliver their very own spinners.

At $80, it’s additionally no longer a dear case. The entrance panel is made from plastic, so the case is obviously no longer constructed to a top rate end, however the tempered-glass panel is liked. Still, there’s numerous festival on this phase. We’ll in finding out later on this assessment whether or not the InWin 216 merits a place on our best possible PC circumstances checklist, however in case you’ve learn this a long way, you’ll be able to most definitely bet the solution. 

InWin 216 Specifications

TypeMid-Tower ATX
Motherboard SupportMini-ITX, Micro-ATX, ATX, E-ATX
Dimensions (HxWxD)18.3 x 8.7 x 18.1 inches (465 x 220 x 460mm)
Space Above Motherboard0.9 inches (23mm)
Max GPU Length15 inches (380mm)
CPU Cooler Height6.5 inches (166mm)
Max PSU Length220 mm
Weight16.1 kilos (7.3 kg)
External Bays
Internal Bays2x 3.5-inch, 2x 2.5-inch
Expansion Slots7x + 2x vertical
Front I/O2x USB 3.0, 3.5 mm Audio, 3.5 mm Mic
OtherTempered Glass Panel
Front FansUp to 3x 120mm
Rear FansUp to 1x 120mm
Top FansUp to 2x 120mm
Bottom Fans
Side Fans
RGBNo
DampingNo
Warranty1 Year

InWin’s 216 is a reasonably usual ATX mid-tower, however it comes with area for E-ATX motherboards as much as 12 x 13 inches in measurement. The entrance facade is produced from ABS plastic, despite the fact that it has a pleasing matte end that hides the cheapness, at the side of an aluminum edge strip as an accessory. 

Features of InWin 216

Image 1 of 6

InWin 216

(Image credit score: Tom’s Hardware)

Image 2 of 6

InWin 216

(Image credit score: Tom’s Hardware)

Image 3 of 6

InWin 216

(Image credit score: Tom’s Hardware)

Image 4 of 6

InWin 216

(Image credit score: Tom’s Hardware)

Image 5 of 6

InWin 216

(Image credit score: Tom’s Hardware)

Image 6 of 6

InWin 216

(Image credit score: Tom’s Hardware)

The left aspect is a tempered-glass panel with an excessively darkish, nearly inexperienced tint. In some respects, the darkish tint is excellent, since the inner is messy and cables are tough to control well. The tint hides all of that and is forgiving on stylistically mismatched elements. The glass panel, in addition to the panel overlaying the cable control aspect, each drop into the toes of the chassis on the backside, after which use two thumbscrews on the best to stick protected.

The glass additionally comes with integrated magnets to stay it in position right through putting in or doing away with screws, which is an excessively considerate characteristic. But, with most effective thumbscrews on the best, it’s an ungainly glance between all thumbscrews at the aspect, or no thumbscrews in any respect.

(Image credit score: Tom’s Hardware)

Atop the chassis is the entrance IO, which is composed of the standard pair of USB 3.0 ports, headphone and mic jacks, and an influence button. There is a place the place a USB Type-C port would had been put in, as you’ll be able to see molded into the plastic, however there may be none provide. 

InWin 216 Internal Layout 

The inner of the InWin 216 is reasonably undeniable and provides up a couple of curious design possible choices. Although there may be area for as much as E-ATX motherboards, loads of area is going wasted previous the motherboard that doesn’t seem to be helpful for anything else specifically. The advantage of this: massive 380 mm (15 inch) GPUs are supported, despite the fact that it’s uncommon to ever see one that gigantic. CPU coolers will also be as much as 166 mm (6.3 inches) tall. 

Image 1 of 3

InWin 216

(Image credit score: Tom’s Hardware)

Image 2 of 3

InWin 216

(Image credit score: Tom’s Hardware)

Image 3 of 3

InWin 216

(Image credit score: Tom’s Hardware)

Underneath the PSU shroud there’s considerable area for the ability provide, at the side of caddies for two 3.5-inch drives. Two 2.5-inch drives are compatible at the back of the motherboard tray.

But we’re no longer partial to the inner. There are loads of cutouts that don’t appear to have a function, and so they don’t make cable control simple as extra cables finally end up visual. For a chassis that helps E-ATX motherboards and has this a lot wasted area, the selection to simply make room for two 3.5-inch drives may be puzzling, as many consumers on this phase most likely need more room for arduous drives. And there’s no scarcity of area for them right here.

InWin 216 Cooling 

As famous up best, InWin does no longer come with any enthusiasts with the 216. That’s a call that has some advantage to it, as many fanatics do like to pick out their very own enthusiasts over the inexpensive ones that normally come integrated with finances circumstances. But the finances InWin 216 gained’t most likely please that crowd, and we’ve additionally observed in Phanteks’ $60 Eclipse P300A {that a} unmarried, affordable fan can carry out adequately for plenty of programs. Also, regardless of being a chassis that measures 220 mm (8.7 inches) huge, the InWin 216 most effective helps 120 mm enthusiasts. You can set up one on the rear exhaust, two up best, and three on the consumption.

The entrance consumption is just a little restrictive, however that’s alright because it’s correctly close extra at the consumer’s aspect (left) than the fitting, guiding the noise clear of you. The entrance, best, and backside additionally all have fan filters.

One factor to notice, despite the fact that, is that there’s most effective 23 mm (that’s not up to an inch) of area between the highest of the motherboard and the highest of the chassis. Although enthusiasts are compatible high quality right here, the location of the fan mounts is so as regards to the motherboard that you are going to no longer be capable to mount a liquid cooling radiator right here, so that you’ll have to make sure your selection of AIO, if you select to make use of one, has lengthy sufficient tubing to increase to the entrance of the InWin 216 (or the rear exhaust in case you have a 120mm AIO).