List of Error Canon Pixma MX310, MX318

(*15*)

Operator Name Mistakes
Mistakes and warnings are displayed by the use of the following ways:

1.    Operator title errors are indicated by the use of the Alarm LED lit in orange, and the error and its solution are displayed on the LCD.

2.    Messages during printing from a computer are displayed on the MP driving force Standing Track.

3.    Error codes are printed throughout the “operator title/provider title error record” space in EEPROM information Print

Buttons official when an operator title error occurs:

1.    ON/OFF button: To turn the instrument off and on over again.

2.    OK button: To clear and get well from an error. In some operator title errors, the error will automatically be cleared when the cause of the error is eliminated, and pressing the OK button might not be crucial.

3.    Prevent/Reset button: To cancel the job at error occurrence, and to clear the error.


(*2*)(*1*)

Operator Name Error
Alarm LED Blinking in Orange

(*5*)

Error

Error

code

U No.

Message on the LCD

Resolution

(*7*)

No paper throughout the rear tray.

[1000]

LOAD PAPER

SET PAPER AND PRESS [OK].

(*10*)

Set the paper in the rear tray,and press the OK button.

(*7*)

Entrance door is closed.

[1250]

OPEN PAPER OUT TRAY

(*10*)

Open the paper output tray.

(*7*)

Paper jam.

[1300]

PAPER JAMMED

CLEAR PAPER JAM AND PRESS [OK].

(*10*)

Take away the jammed paper, and press the OK button.

(*7*)

Ink cartridge not

installed, or not

as it should be installed.

[1401]

U051

CHECK INK

U051

(*10*)

Set up the ink cartridge as it should be.

(*7*)

Ink cartridge

temperature sensor error.

[1403]

U052

COOLING HEAD

(*10*)

Re-set the ink cartridge. If the error is not cleared, the ink cartridge could also be inaccurate.

Substitute the ink cartridge.

(*7*)

Non-supported ink

cartridge is installed.

[1485]

U059

CHECK INK

U059

(*10*)

A non-supported ink cartridge is installed. Set up the supported ink cartridge.

(*7*)

Ink cartridge in a

fallacious position.

[1680]

U076

CHECK INK

U076

(*10*)

Re-set the ink cartridge. If the error is not cleared, the ink cartridge could also be inaccurate.

Substitute the ink cartridge.

(*7*)

More than one ink

cartridges of the

an identical color installed.

[1681]

U075

CHECK INK

U075

(*10*)

Re-set the ink cartridge. If the error is not cleared, the ink cartridge could also be inaccurate.

Substitute the ink cartridge.

(*7*)

Ink cartridge

error

[1682]

U150

CHECK INK

U150

(*10*)

Re-set the ink cartridge. If the error is not cleared, the ink cartridge could also be inaccurate.

Substitute the ink cartridge.

(*7*)

Ink cartridge not

identified.

[1684]

U140

CHECK INK

U140

(*10*)

A non-supported ink cartridge is installed. Set up the supported ink cartridge.

(*7*)

The last ink

amount unknown.

[1686]

U162

CHECK INK

U162

(*10*)

Substitute the ink cartridge and close the scanning unit. Printing with an empty ink cartridge can hurt the instrument.

To continue printing without converting the ink cartridge(s), press the Prevent/Reset button for 5 sec. or longer to disable the

function to find the rest ink amount.

(*7*)

Ink cartridge not

completely installed.

[1687]

U053

CHECK INK

U053

(*10*)

Re-set the ink cartridge. If the error is not cleared, the ink cartridge could also be inaccurate.

Substitute the ink cartridge.

(*7*)

No ink.

[1688]

U163

CHECK INK

U163

(*10*)

Substitute the ink cartridge and close the scanning unit. Printing with an empty ink cartridge can hurt the instrument.

To continue printing without converting the ink cartridge(s), press the Prevent/Reset button for 5 sec. or longer to disable the

function to find the rest ink amount.

(*7*)

Caution: The ink

absorber becomes

just about entire.

[1700]

REQ. SERVICE SOON

(*10*)

Urgent the OK button will cross out the error, and allow printing without converting the ink absorber. Then again, when the ink absorber becomes entire, no further printing can be performed till the correct

ink absorber is modified.

(*7*)

Caution: The platen ink absorber

becomes just about entire

[1710]

REQ. SERVICE SOON

(*10*)

Urgent the OK button will cross out the error, and allow printing without converting the ink absorber. Then again, when the ink absorber becomes entire, no further printing can be performed till the correct

ink absorber is modified.

(*7*)

The connected digital virtual digital camera or digital video virtual digital camera does

not beef up Digicam Direct Printing.

[2001]

INCOMPATIBLE CAMERA DISCONNECT CAMERA

CABLE

(*10*)

Take away the cable between the virtual digital camera and the instrument.

(*7*)

Non-supported HUB

[2002]

UNSUPPORTED USB HUB REMOVE HUB

(*10*)

Take away the suitable USB HUB from the PictBridge (USB) connector.

Carrier Name Error

Cyclic Blinking in Orange (Alarm LED) and Inexperienced (ON/OFF LED)

(*5*)

Cycles of

blinking of

Alarm and

Energy LEDs

Error

Error

code

Stipulations

(*9*)

2 circumstances

(*6*)

Carriage error

(*12*)

[5100]

(*8*)

An error handed off throughout the carriage

encoder signal.

(*9*)

3 circumstances

(*6*)

Line feed error

(*12*)

[6000]

(*8*)

An error handed off throughout the LF encoder

signal.

(*9*)

5 circumstances

(*6*)

ASF (cam) sensor error

(*12*)

[5700]

(*8*)

This mistake takes place when feeding

paper from the rear tray after an

error handed off in the rear tray cam

sensor.

(*9*)

6 circumstances

(*6*)

Inside temperature

error

(*12*)

[5400]

(*8*)

The inner temperature is not standard.

(*9*)

7 circumstances

(*6*)

– Primary ink absorber entire

– Platen ink absorber entire

(*12*)

[5B00,

5B01]

(*8*)

The principle ink absorber or platen ink

absorber becomes entire.

(*9*)

8 circumstances

(*6*)

Print head temperature rise error

(*12*)

[5200]

(*8*)

The print head temperature exceeded the required price.

(*9*)

9 circumstances

(*6*)

EEPROM error

(*12*)

[6800]

[6801]

(*8*)

A topic handed off in writing to the

EEPROM.

(*9*)

10 circumstances

(*6*)

VH practice error

(*12*)

[B200]

(*8*)

The inner temperature exceeded

the required price.

(*9*)

12 circumstances

(*6*)

AP position error

(*12*)

[6A00]

(*8*)

An error handed off throughout the AP motor

during purging operation.

(*9*)

15 circumstances

(*6*)

USB Host VBUS

overcurrent

(*12*)

[9000]

(*8*)

The USB Host VBUS is overloaded.

(*9*)

22 circumstances

(*6*)

Scanner space position error

(*12*)

[5010]

(*8*)

The scanner unit cannot uncover the

space position, or the scanner unit

warming-up is not performed as it should be at power-on.

(*9*)

Energy LED

grew to grow to be off

Alarm LED

(orange) lit

(*6*)

ROM error

RAM error

(*12*)

None

(*8*)

The checksum price is incorrect in

the flash ROM or RAM check at

hard-power-on.


___________________
Beneficial posts
(*3*)Canon Printer Resetter Assortment
Reset Canon Pixma MX310 Waste ink absorber is entire
Canon Pixma MX310 Carrier Handbook
Canon Pixma MX310 Portions Catalog