Categories
hardware internet tech

A Very Buttoned Up Raspberry Pi Media Server

Projects that flip the Raspberry Pi right into a cheap Network Attached Storage (NAS) answer are quite common; all you want is the correct instrument, the Pi itself, and a few USB garage gadgets. But except you specifically just like the “Medusa” glance, with unfastened cables operating far and wide, you’ll most likely wish to put the {hardware} into an acceptable enclosure. Unfortunately, that’s the place the moderately strange format of the Pi could make issues difficult.

Which is why [AraymBox] got here up with this distinctive “pill” enclosure for the Raspberry Pi and two USB-attached exhausting drives. Every effort has been made to stay the outdoor of this design as blank and streamlined as conceivable. The asymmetrical loops of wires that we so regularly see on different initiatives are long past, with the entirety been introduced within thank you to a couple suave wiring. This enclosure seems like a qualified product, and when you’re prepared to position within the effort, you’ll be able to have one to name your individual.

The excellent information is that the three-D revealed enclosure handiest has four portions, albeit relatively huge ones, and none of which require make stronger subject matter. So it must be a very easy print even on a slightly low-end system. Of direction, you’re no longer going to get that futuristic steel glance with no little paintings. You’ll wish to do a large amount of sanding, filling, and paint paintings to get that more or less a floor end. Then once more, that tough “simply revealed” glance has a undeniable cyberpunk attraction to it as smartly.

But the broadcast enclosure is handiest part the fight. Inside, [AraymBox] has soldered the USB to SATA adapter cables immediately to the Raspberry Pi to stay issues tight and compact. A micro USB breakout board used to be then used so as to add an influence connector at the again of the tool the place the Ethernet and USB ports are, fixing the problem of getting one lonely USB cable popping out of the facet of the case.

In the previous we’ve observed different makes an attempt to create a three-D printable enclosure for Pi servers, with various ranges of good fortune. While some would argue that the simpler answer is to simply throw the Pi and the drives in a big sufficient enclosure that it doesn’t subject what the wiring seems like, we admire the trouble that some hackers are prepared to position in to make one thing customized.